Portronics Spark X — Complete Guide

Modified on Thu, 1 Oct at 10:54 AM

TABLE OF CONTENTS


Product Overview

The Portronics Spark X is a compact 5W Bluetooth speaker with built-in FM radio and TF/microSD playback. It supports Bluetooth, FM and TF modes and charges through a Type-C port.

Quick Reference

FeatureDetails
ProductPortronics Spark X Bluetooth Speaker
Output Power5W
Bluetooth5.3
Frequency Response80Hz – 18kHz
Battery3.7V / 1500mAh
Battery TypeLithium 18650
Charging5V Type-C
Charging Time2–3 hours
Playback ModesBluetooth, FM, TF/microSD
TWSSupported

What's in the Box

ItemQuantity
Spark X Speaker1
Type-C Cable1
User Manual1

Buttons & Controls

ButtonPressPress & Hold
Play / PausePlay or pause musicSwitch to TWS Bluetooth mode
Next Track / Volume UpNext track / next FM channelIncrease volume
Previous Track / Volume DownPrevious track / previous FM channelDecrease volume
Mode / PowerChange Bluetooth / FM / TF modePower ON / OFF

Charging

  1. Connect the Type-C cable to the speaker.
  2. Connect the other end to a suitable 5V power source.
  3. Red blinking indicates charging.
  4. Red steady indicates charging is complete.
  5. The supplied manual specifies approximately 2–3 hours for full charging.

Bluetooth Mode

  1. Turn on the speaker.
  2. Press the Mode / Power button until Bluetooth mode is selected.
  3. Open Bluetooth settings on your phone or source device.
  4. Search for and select Spark X.
  5. Start playback.

FM Radio Mode

  1. Turn on the speaker.
  2. Press the Mode / Power button until FM mode is selected.
  3. Use Next and Previous to move through FM channels.
  4. Press and hold Next or Previous to adjust volume.

TF / microSD Mode

  1. Insert a compatible TF/microSD card.
  2. Press the Mode / Power button until TF mode is selected.
  3. Use Play/Pause, Next and Previous for playback control.

TWS Mode

The supplied manual indicates that TWS Bluetooth mode is activated by pressing and holding the Play/Pause button.

Important: TWS pairing is only guaranteed to work reliably between two Spark X units from the same production batch. Pairing speakers from different batches may fail or behave inconsistently. Check the batch/date code on both units if TWS pairing doesn't work.

Indicator Guide

IndicatorMeaning
Red blinkingCharging
Red steadyCharging complete

Care & Safety

  • Use a suitable 5V charging source.
  • Keep the charging port clean and dry.
  • Keep the speaker away from water and liquids unless it is specifically rated for exposure.
  • Do not attempt to open or repair the speaker yourself.
  • Stop using the product if the battery or charging port appears damaged.
  • Store the speaker in a cool, dry place when not in use.

Still stuck?

If the issue persists after performing all troubleshooting steps, please raise a support request.

Our support team will assist you further.

Support

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article