Portronics Resonate 2 — Complete Guide

TABLE OF CONTENTS

• Product Overview
• Quick Reference
• What's in the Box
• Controls
• Power ON / OFF
• Bluetooth Pairing
• Playback Modes
• Music Controls
• TWS Stereo Pairing
  • Disconnecting TWS
  • Reconnecting TWS
• Hands-Free Calling
• Wireless Karaoke Microphone
  • Connecting the Microphone
  • Microphone Controls
• Sunset Lamp / LED Effects
• Charging
• Reset Function
• Battery & Runtime
• Low Battery
• Care & Safety
• Still stuck?

Product Overview

The Portronics Resonate 2 is a 14W wireless Bluetooth speaker with a wireless karaoke microphone. It supports Bluetooth, USB and TF card playback, hands-free calling, TWS stereo pairing and multiple LED illumination modes.

Quick Reference

What's in the Box

Charging adapter is not included. Use a suitable rated 5V/2A charger.

Controls

Power ON / OFF

Press and hold the Power button to turn the speaker ON or OFF.

The speaker can automatically reconnect to a previously connected phone when it is turned on again or switched back to Bluetooth mode.

Bluetooth Pairing

1. Turn on the Resonate 2.
2. The speaker enters Bluetooth mode.
3. Turn on Bluetooth on your phone or other device.
4. Select Resonate 2 from the available Bluetooth devices.
5. Once paired, start playback.

The speaker supports automatic reconnection when the phone is within range.

Playback Modes

Short-press the Mode button to switch between the available playback modes, including:

• Bluetooth
• USB
• TF card

Select the mode that matches your connected source.

Music Controls

TWS Stereo Pairing

TWS allows two identical Resonate 2 speakers to work together for wireless stereo sound.

1. Turn on two identical Resonate 2 speakers.
2. Make sure both speakers are in Bluetooth mode.
3. Select one speaker.
4. Press and hold the Mode button for about 2 seconds.
5. Wait for the pairing tone.
6. After TWS pairing is successful, connect the paired speaker to your phone through Bluetooth.
7. Start wireless playback.

Disconnecting TWS

Press and hold the Mode button for about 2 seconds again to disconnect TWS.

Reconnecting TWS

If TWS is disconnected because of shutdown or a mode change, the speakers can automatically reconnect when switched on again or returned to Bluetooth mode.

Important: TWS pairing is only guaranteed to work reliably between two Resonate 2 units from the same production batch. Pairing speakers from different batches may fail or behave inconsistently. Check the batch/date code on both units if TWS pairing doesn't work.

Hands-Free Calling

When the speaker is connected to your phone through Bluetooth:

1. Press Play/Pause once to answer an incoming call.
2. Press and hold Play/Pause to switch the call back to the phone.
3. Press Play/Pause once to end the call.

Wireless Karaoke Microphone

Connecting the Microphone

1. Press and hold the microphone's Power button to turn it on.
2. The microphone automatically pairs with the speaker.
3. A stable blue indicator confirms the connection.

Microphone Controls

• Use + / − to increase or decrease microphone volume.
• Press the Mute button to temporarily silence the microphone.
• Press Mute again to resume.

A red LED on the microphone indicates that it is muted.

Sunset Lamp / LED Effects

The speaker supports multiple lighting modes:

The speaker automatically enters Mode 1 when powered on.

Charging

1. Connect the supplied Type-C charging cable to the speaker.
2. Use a suitable 5V/2A charger.
3. Allow approximately 3 hours for charging.
4. Do not use the speaker while it is charging.

Reset Function

To restore the speaker to factory settings:

1. Press and hold Volume Down for more than 5 seconds.
2. The speaker powers off.
3. Bluetooth and TWS connection memory is cleared.
4. The speaker returns to factory settings.

Battery & Runtime

The speaker uses a 3.7V / 2000mAh battery.

The specified playtime is up to 5 hours under typical product conditions. Actual runtime varies with volume, lighting, Bluetooth and microphone use.

Low Battery

When the battery is low:

• The speaker may automatically reduce its volume.
• A low-battery voice prompt can alert you.
• Connect the Type-C cable and recharge the speaker.

Care & Safety

• Use the speaker in a normal-temperature environment.
• Keep it away from rain and moisture.
• Do not expose it to excessive heat.
• Do not disassemble, repair or modify the speaker yourself.
• Disconnect power before cleaning.
• Use a soft cloth; avoid harsh chemicals.
• Avoid listening at maximum volume for prolonged periods.
• The speaker contains a built-in lithium battery; do not expose it to fire.
• Do not use the speaker while charging.

Still stuck?

If the issue persists after performing all troubleshooting steps, please raise a support request.

Our support team will assist you further.

Support

• Visit: www.portronics.com
• Support Portal: support.portronics.com