Portronics Oria Pro — Complete Guide

TABLE OF CONTENTS

• Product Overview
• Quick Reference
• What's in the Box
• Parts & Controls
• Charging the Oria Pro
• Powering ON and OFF
• Selecting a Light Mode
• Adjusting Brightness
• Understanding the Battery Indicator
• Attaching Oria Pro to a Phone
  • iPhone 12 and Later
  • Other Phone Models
• Adjusting the Light Position
• Using the Built-In Mirror
• Using the Foldable Stand
• Cleaning & Maintenance
• Safety Precautions
• Troubleshooting
• Still stuck?

Product Overview

The Portronics Oria Pro (POR 3702) is a magnetic selfie light with a built-in mirror and an adjustable foldable stand. It provides three light colour modes, adjustable brightness and a rechargeable battery. The light can attach magnetically to compatible phones and can be positioned at different angles for selfies, makeup, video calls and content creation.

Quick Reference

Actual battery backup depends on the selected brightness and usage conditions.

What's in the Box

Parts & Controls

Charging the Oria Pro

1. Connect a USB Type-C cable to the charging port.
2. Connect the other end to a compatible 5V/1A USB power source.
3. The battery indicator flashes while charging.
4. When fully charged, all three indicator lights turn ON.
5. Disconnect the charging cable after charging.

The charging time is approximately 1.5 hours.

Pass-through charging: Pass-through charging is supported.

Powering ON and OFF

• Power ON: Press and hold the Power / Mode Button for 3 seconds. The indicator lights turn ON one by one.
• Power OFF: Press and hold the same button for 3 seconds again.

Selecting a Light Mode

After powering ON the Oria Pro, short-press the Power / Mode Button to cycle through the three light modes.

The product has a mode-memory function. When powered ON again, it retains the light mode used before the last power-off.

Adjusting Brightness

1. Turn ON the fill light.
2. Locate the Brightness Control Wheel.
3. Turn the wheel to the right to increase brightness.
4. Turn the wheel to the left to decrease brightness.
5. Adjust the brightness to suit the surrounding light and your usage.

Understanding the Battery Indicator

The battery indicator displays the remaining battery across three levels after the product is powered ON.

Attaching Oria Pro to a Phone

iPhone 12 and Later

iPhone 12 and later models can attach the magnetic fill light directly to the back of the phone.

1. Bring the Oria Pro magnetic ring close to the back of the phone.
2. Align it with the phone's magnetic area.
3. Allow the magnetic mount to attach.
4. Check that the light is secure before adjusting its position.

Other Phone Models

For other phone models, use the included magnetic ring.

1. Remove the protective sticker from the magnetic ring.
2. Attach the magnetic ring to the back cover of the phone or phone case.
3. Align the Oria Pro magnetic fill light with the attached ring.
4. Attach the light magnetically.
5. Check that it is secure before use.

Make sure the phone case surface is clean and dry before attaching the magnetic ring.

Adjusting the Light Position

• The fill light can be flipped through 180°.
• When attached to the phone, extend the shaft / extension rod to create multi-angle lighting.
• The built-in mirror can also be flipped through 180° for convenient use.
• Adjust the position gently and check that the magnetic attachment remains secure.

Using the Built-In Mirror

1. Flip the mirror to the required viewing position.
2. Adjust the light and stand angle for convenient viewing.
3. The mirror can be rotated through 180° according to the product instructions.

Using the Foldable Stand

The foldable stand allows the Oria Pro to be positioned for hands-free use.

1. Unfold the stand carefully.
2. Place it on a flat, stable surface.
3. Adjust the light angle and extension rod as needed.
4. Check that the stand is stable before using the device.

Cleaning & Maintenance

• Switch OFF the product before cleaning.
• Clean the product using a soft, dry cloth.
• Do not use abrasive cleaning materials.
• Do not expose the product to corrosive chemicals.
• Avoid dropping, colliding with or applying heavy impact to the product.
• Keep the charging port dry.
• Do not disassemble or attempt to repair the product yourself.

Safety Precautions

• Avoid dropping or subjecting the product to heavy impact.
• Do not place the product in excessively high temperatures.
• Keep away from corrosive chemicals.
• Do not disassemble or repair the product yourself.
• Use a compatible 5V/1A charging source.
• Keep the product and charging port away from moisture.
• Check the magnetic attachment before moving or repositioning the phone.

Troubleshooting

Still stuck?

If the issue persists after performing all troubleshooting steps, please raise a support request.

Our support team will assist you further.

Support

• Visit: www.portronics.com
• Support Portal: support.portronics.com